新闻中心

How to Make a Vibrating Motor

Time: 2010-12-17 10:49:02

Vibration-Motor

Perhaps you need to unwind but don't feel as though you want to fork up the dough to buy a massager, or wish to risk buying a used one at a thrift store. Build your own by making a vibrating motor instead. It's easier than you think.

 You can find a DC motors in VCRs and tape players.

 You might find that clipping it to the top and also the bottom of the gear works best as you make a vibrating motor.

Test the clip to make sure it can revolve around safely without catching on any protruding or otherwise motor parts.

Turn on your soldering gun and allow it to heat up until it is very hot.

Hold the tip to the alligator clip until it melts the clip and the plastic together. This should happen in 30 seconds or less.

Solder the alligator clip so that the clip cannot open as you make a vibrating motor.

Make sure your finger is out of the way as you attach the power and ground wires to the DC motor. Connect the ground and power wire to the motor.

 

Home |About Us |Products |News |Inquiry Now |Contact Us |Download
版权 © Nningbo Sunelec Co., Ltd. 保留所有权利